Aluminum profile can be seen everywhere in daily production and life, whether it is in the field of door and window curtain wall construction engineering, or in the fields of transportation, aerospace, mechanical equipment, advertising decoration, municipal bridges and other industrial aluminum profiles. As a commonly used profile, it has high strength , Light weight, strong corrosion resistance, novel structure, convenient installation, material saving, durable and other characteristics. In order to ensure the practicality of aluminum profiles, they need to be maintained during use to ensure their functionality and aesthetics.
1. When the surface of the aluminum profile is corroded and polluted, it should be cleaned in time. The dirt can be wiped with a soft cloth moistened with alcohol, and then washed with water. After cleaning the aluminum alloy profile, it is best to polish the anodized film with a high-quality topcoat protective wax, or even spray a layer of acrylic-based varnish.

2. During the transportation and transfer of aluminum profiles, you must be extra careful, and you must handle them with care to prevent bumps and bumps; during transportation, they must be covered with thatch cloth to prevent intrusion of rainwater, etc.; aluminum profiles are strictly prohibited during shipment Loosely load the car to avoid the impact of the profile bumps and affect the appearance.
3. According to the environment in which it is used, the aluminum profile must be cleaned of pollutants on a regular basis to maintain its brightness.
4. The surface of aluminum profile should be cleaned with soft cloth or towel. It is strictly forbidden to use sandpaper, wire brush or other abrasives to clean the surface of the profile. Use warm water containing lubricant or neutral cleaning agent to clean it. Do not use acidic or alkaline cleaning agents. If you can't use washing powder, strong acid and alkali cleaners, the surface of the aluminum profile will be easily corroded.
5. The storage environment of aluminum profiles should be dry and ventilated. When storing, the bottom must be separated from the ground with a skid, and the distance from the ground should be greater than 10CM; storage with chemical data and moisture data is prohibited.